Okay, heres an update. Gutted the Dodge, replaced some gaskets, and threw it together to weld in mounts... So heres the pics:
Poor old truck...
Top view of engine
Unlike the truck, the engine was well taken care of most of its life...
Engine, tranny, and t-case suspended in air.
Passenger side of the new drivetrain
First fit. That crossmember is going to have to go!!
Much better
Radiator moved forward into the grille shell.
Driver side motor mount tacked in place.
Passenger motor mount tacked in place.
Engine finally set in place.
Transmission
Finally, a centered output t-case!!
Passenger side view of t-case
Driver side view of t-case