This disc conversion kit is a weld on kit that gives you a removable bracket in the end. Designed this way so you have no spacers what so ever and still have a removable bracket. You get everything you see in the photo x 2!
Both the bracket and weld flange are 3/8" thick steel, CNC cut for a precise fit! The flange is NOT threaded. So you will never have to deal with damaged threads in the flange. If a bolt or nut are to become damaged just replace and go again! Simple and effective. Hardware consists of 1/2" x 20 grade 8 bolt and nuts, Yep, they are grade 8 nyloc nuts. Loc washers are high alloy for a long lasting hold.
This kit will include the rotors as well. The rotors are not an off the shelf item. Dana 70 hubs (that we have seen) require a larger center hole than what is commonly available. Rotor availability is no problem, we have them on the shelf now! This kit uses the same caliper as our 14BFF disc conversion. A 76-78 Eldorado Caliper or a 71-87 GM 3/4 ton front rotor.
Introductory price at $140.00.
We've also added the Blazer Wraptor to the website and hope to get some more of the new stuff up soon!
February 7th, 2007, 08:22 PM
Dana 70 disc conversion. SRW. 
Linear Mode
